Effects of Wastewater Sludge Addition on Fired Clay Bricks: Enhancing Performance and Sustainable Construction Practices
Article Sidebar
Main Article Content
Abstract
This study explores the impact of incorporating wastewater sludge into fired clay bricks to improve their performance and promote sustainable construction. Physical, mechanical, and environmental properties of the sludge-amended bricks are investigated to assess their suitability as an alternative construction material. Lab tests are conducted to characterize the sludge and clay, and brick samples with varying sludge content are produced. Physical properties such as water absorption, are analyzed to determine the influence of sludge addition on the bricks’ structural characteristics. Mechanical tests, including compressive and flexural strength evaluations, assess the performance of the sludge-amended bricks compared to traditional clay bricks. Additionally, environmental aspects are considered to evaluate the sustainability of the sludge-amended bricks. Life cycle assessment and carbon footprint analysis quantify the environmental benefits and drawbacks associated with their production and use. The findings of this study contribute to the knowledge of sustainable construction materials by exploring the potential utilization of wastewater sludge in fired clay brick production.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
References
Ashraf Mohamed Heniegala, Mohamed Ahmed Ramadanb , Ahmed Naguib (April 2020) “Study on properties of clay brick incorporating
sludge of water treatment plant and agriculture waste“Case Studies in Construction Materials 13 (2020) e00397 https://doi.org/10.1016/j.cscm.2020.e00397
Faisal Amin ,Safeer Abbas, Wasim Abbass (May 2022) “Potential Use of Wastewater Treatment Plant Sludge in Fabrication of Burnt
Clay Bricks Sustainability” 2022, 14, 6711. https://doi.org/10.3390/su14116711
Farah Anjum, Abdul Ghaffar (October 2018)” Effect of sintering temperature on mechanical and thermophysical properties of biowaste-added fired clay bricks” Springer Japan KK, part of Springer Nature 2018 https://doi.org/10.1007/s10163-018-0810-x
Ghita El Boukili1, Mohamed Ouakarrouch (July 2021)"Recycling of Olive Pomace Bottom Ash (by-Product of the Clay Brick Industry) for Manufacturing Sustainable Fired Clay Bricks”https://doi.org/10.1007/s12633-021-01279-x
D.Eliche-Quesada(December 2015)”Use of bottom ash from olive pomace Combustion in the production of eco-friendly fired clay bricks” Waste Management 48(2016) 323–333https://doi.org/10.1016/j.wasman.2015.11.042
Farooq, A., verma, P., & singla, S. (2019). Use of Bottom Ash as a Partial Replacement of Fine Aggregates in Flexible Pavement. In
International Journal of Innovative Technology and Exploring Engineering (Vol. 9, Issue 1, pp. 974–981). https://doi.org/10.35940/ijitee.a4117.119119
Sengupta, A., Varma, V., Kiran, M. S., Johari, A., & R, M. (2019). Cost-Effective Autonomous Garbage Collecting Robot System Using Iot And Sensor Fusion. In International Journal of Innovative Technology and Exploring Engineering (Vol. 9, Issue 1, pp. 1–8).
https://doi.org/10.35940/ijitee.a3880.119119
Naidu, G. G., Prasad, M. S. D. V., Varma, U. U., & Sandhya, S. (2019). Effect of R.O. Waste Water on Properties of Concrete. In International Journal of Recent Technology and Engineering (IJRTE) (Vol. 8, Issue 3, pp. 2806–2808). https://doi.org/10.35940/ijrte.c5201.098319
Radhamani, V., & Dalin, G. (2019). Significance of Artificial Intelligence and Machine Learning Techniques in Smart Cloud Computing: A Review. In International Journal of Soft Computing and Engineering (Vol. 9, Issue 3, pp. 1–7). https://doi.org/10.35940/ijsce.c3265.099319
Islam, M., Mohamed, S. F., Mahmud, S. H., M, A. K. A., & Saeed, K. A. (2020). Towards A Framework for Development of Operational and Maintenance Cost Model of Highway Project in Malaysia. In International Journal of Management and Humanities (Vol. 4, Issue 5, pp. 89–95).