Car Door Sound Quality Assessment - A Review for NVH Performance Research

Main Article Content

Mr. Pandurang Maruti Jadhav
Dr. Kishor B. Waghulde
Dr. Rupesh V. Bhortake

Abstract

Customer comfort in terms of NVH is a tangible and in-tangible effect. NVH is directly and indirectly connected to the psychoacoustics of human beings and lives. As a part of the advanced NVH analysis, the effects of noise have been studied in terms of psychoacoustic parameters such as loudness, sharpness, roughness, fluctuation strength, tonality, etc. Car door or door assembly is an integral part of the car or vehicle. The door is softly and flexibly connected to the main body of the vehicle; it protects passengers from weather effects and accidental impacts. Because of the inherent flexibility of the door, its flexible connections, sharp - transient closing, and vehicle operational excitations, the door assembly is one of the main sources of noise and vibration in vehicles. It is a prime requirement to understand the NVH effect of doors on vehicles, its analysis and ways of improvement. To understand the current status of the basic and advanced NVH analysis of the door, an extensive survey and in detail study was conducted. The main focus is given on technical papers published related to noise/ sound quality (SQ) during the last two decades, i.e., between 1999 – 2022. Total 31 technical papers were scrutinized and summarized in different categories. Broadly divided into: the number of papers published each year, Number of papers on types of SQ assessment, and the number of papers discussed SQ parameters. This study of these 31 papers published between 1999 – 2022 has given a ready reference for the work done on sound quality, mainly related to the vehicle and its door NVH. The total number of parameters considered by different researchers and approaches used by them to assess the psychoacoustic parameters of noise/ sound. Finally, these parameters and their level help to determine the quality of the sound produced or generated by any source.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
Mr. Pandurang Maruti Jadhav, Dr. Kishor B. Waghulde, and Dr. Rupesh V. Bhortake , Trans., “Car Door Sound Quality Assessment - A Review for NVH Performance Research”, IJEAT, vol. 13, no. 3, pp. 14–24, Feb. 2024, doi: 10.35940/ijeat.C4357.13030224.
Section
Articles

How to Cite

[1]
Mr. Pandurang Maruti Jadhav, Dr. Kishor B. Waghulde, and Dr. Rupesh V. Bhortake , Trans., “Car Door Sound Quality Assessment - A Review for NVH Performance Research”, IJEAT, vol. 13, no. 3, pp. 14–24, Feb. 2024, doi: 10.35940/ijeat.C4357.13030224.
Share |

References

Sung-Yuk Kim, Sang-Chul Ryu, Yong-Du Jun, Young-Choon Kim and Jong-Seok Oh, “Methodology for Sound Quality Analysis of Motors for Automotive Interior Parts through Subjective Evaluation”, Sensors 2022, 22, 6898. https://doi.org/10.3390/s22186898

Kun Qian, Zhichao Hou, Jie Liang, Ruixue Liu and Dengke Sun, “Interior Sound Quality Prediction of Pure Electric Vehicles Based on Transfer Path Synthesis”, Appl. Sci. 2021, 11, 4385. https://doi.org/10.3390/app11104385

Mehdi POURSEIEDREZAEI, Ali LOGHMANI, Mehdi KESHMIRI, “Development of a Sound Quality Evaluation Model Based on an Optimal Analytic Wavelet Transform and an Artificial Neural Network”, ARCHIVES OF ACOUSTICS, Vol. 46, No. 1, pp. 55–65 (2021), https://DOI:10.24425/aoa.2021.136560

Gao Yunkai and Liu Zhe, “Sound Quality Prediction of Vehicle Door Closing Based on Experiment and Boundary Element Method”, IOP Conf. Series: Materials Science and Engineering 825 (2020) 012046, https://doi:10.1088/1757-899X/825/1/012046

Erkut Yalcın, Halil Bilal, Ayhan Yagcı, Haluk Erol, “A Numerical Approach for Sound Quality of Vehicle Doors”, International Journal of Acoustics and Vibration, Vol. 25, No. 1, 2020 (pp. 9-16), https://doi.org/10.20855/ijav.2020.25.11475

Woonjoon Kim, Donggun Park, Yong Min Kim, Taebeum Ryu, Myung Hwan Yun, “Sound quality evaluation for vehicle door opening sound using psychoacoustic parameters”, Journal of Engineering Research Vol. 6 No. (2), June 2018 pp. 176-190

Xiaoping Xie, Fandong Zeng, and Guangjian Shen, “Investigation of Objective Parameters of Vehicle Door Closing Transient Sound Quality Based on Complex Analytic Wavelet Method” Hindawi, Shock and Vibration, Volume 2018, Article ID 9478672, 11 pages, https://doi.org/10.1155/2018/9478672

Mosquera-Sanchez, J. A., Sarrazin, M.., Janssens, K., de Oliveira, L. P. R, Desmet, W. “Multiple target sound quality balance for hybrid electric powertrain noise”, KU LEUVEN, https://www.journals.elsevier.com/mechanical-systems-and-signal-processing, https://doi.org/10.1016/j.ymssp.2017.06.034

M. Farid Aladdin, Nawal A. Abdul Jalil, “Psychoacoustic Bias in Vehicle Interior Noise – Preliminary Study”, ScienceDirect, Engineering Physics International Conference, EPIC 2016, https://doi:10.1016/j.proeng.2017.03.052

Zutong Duan, Yansong Wang, Yanfeng Xing, “Sound Quality Prediction of Vehicle Interior Noise under Multiple Working Conditions Using Back-Propagation Neural Network Model”, Journal of Transportation Technologies, 2015, 5, 134-139, Published Online April 2015 in SciRes. http://www.scirp.org/journal/jtts, http://dx.doi.org/10.4236/jtts.2015.52013

Zongcai Liu, Zhaojin Sun,band Shaoqing Liu, “Study on the Sound Quality Objective Evaluation of High Speed Train's Door Closing Sound”, International Forum on Energy, Environment Science and Materials (IFEESM 2015).

Hyeonho JO, Weonchan SEONG, Hyeongrae Lee, Seonghyeon Kim, Dongchul Park, Yeon June Kang, “A Study on sound quality evaluation index of car door latch and improving sound quality by modifying door latch assembly design”, Inter-noise 2014.

Marie-Celine Bezat, Richard Kronland-Martinet, Vincent Roussarie, Sølvi Ystad, “From acoustic descriptors to evoked quality of car door sounds”, The Journal of the Acoustical Society of America, July 2014, https://DOI:10.1121/1.4883364.

Etienne Parizet, Erald Guyader, Valery Nosulenko, “Analysis of car door closing sound quality”, Applied Acoustics, Elsevier, 2008, 69, pp.12-22. hal-00849046.

G. Volandri1, F. Di Puccio, P. Forte, C. Carmignani, F. Becattini, “A psychoacoustic approach for sound quality assessment of automotive power windows”, PROCEEDINGS OF ISMA2012-USD2012.

M. Ercan Altinsoy, “Quality Evaluation of Engine Start and Idle Sounds”, Proceedings of 20th International Congress on Acoustics, ICA 2010, 23-27 August 2010, Sydney, Australia.

Gabriella Cerrato, “Automotive Sound Quality – Powertrain, Road and Wind Noise”, SOUND & VIBRATION/APRIL 2009, pp. 16-24.

Hugo Fastla, Florian Völk, Martin Straubinger, “Standards for calculating loudness of stationary or timevarying sounds”, INTER-NOISE 2009.

Gabriella Cerrato, “Automotive Sound Quality – Accessories, BSR, and Brakes”, SOUND & VIBRATION/SEPTEMBER 2009, pp. 10-15.

Gabriella Cerrato Jay, “Sound/Vibration Quality Engineering”, SOUND AND VIBRATION/APRIL 2007, pp. 2-9.

Fastl Hugo, Patsouras Christine, Bayer Stephan, Beckenbauer Thomas, “PSYCHOACOUSTIC EVALUATION OF SOUND ABSORBING ROAD SURFACES”, 19th INTERNATIONAL CONGRESS ON ACOUSTICS MADRID, 2-7 SEPTEMBER 2007.

Sonoko Kuwano, Hugo Fastl, Seiichiro Namba, Seishi Nakamura, Hiroshi Uchida, “Quality of door sounds of passenger cars”, Acoust. Sci. & Tech. 27, 5 (2006). Pp. 43.50, https://doi:10.1250/ast.27.309.

J. K. LEE, Y. W. PARK, J. B. CHAI, H. K. JANG, “DEVELOPMENT OF A SOUND QUALITY INDEX FOR THE EVALUATION OF BOOMING NOISE OF A PASSENGER CAR BASED ON REGRESSIVE CORRELATION”, International Journal of Automotive Technology, Vol. 6, No. 4, pp. 367-374 (2005)

Anders Skold, Daniel Vastfjall, Ilinka Veljanovska, “Vibrational Influence on Product Sound Quality in Cars”, ForumAcusticum 2005 Budapest.

Martin Pflueger and Wolfgang Stuecklschwaiger, “Sound and Vibration Quality Map for Commercial Vehicles”, 2001-01-1570, Society of Automotive Engineers, Inc.

Patrick Susini, Stephen McAdams, Suzanne Winsberg, “A Multidimensional Technique for Sound Quality. A.ssessment”, ACUSTICA, acta acustica, Vol. 85 (1999) 650- 656.

Marek MORAVEC, “SOUND QUALITY SUBJECTIVE AND OBJECTIVE ASSESSMENT METHODS OF DOMESTIC APPLIANCES”, ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering, Tome XVII [2019], Fascicule 4 [November]

Tomasz Letowski, “Sound quality assessment: concepts and criteria”, ResearchGate, https://www.researchgate.net/publication/263008148

Daniela Maffiodo and Raffaella Sesana, “Loudness calculation procedure to study electronic steering column lock noise measurement”, Advances in Mechanical Engineering, 2019, Vol. 11(1) 1–9 SAGE, https://DOI:10.1177/1687814018819577

Klaus Genuit, “The sound quality of vehicle interior noise: A challenge for the NVH engineers”, ResearchGate, https://www.researchgate.net/publication/228602895, https://DOI:10.1504/IJVNV.2004.004079.

Dr. Karthick Jayarama, Jayanthraj Mohanraj, “Influence of Tolerancing Methods and Aspects of Perceived Quality on Side closures of Luxury Cars”, ScienceDirect, 14th CIRP Conference on Computer Aided Tolerancing (CAT), Procedia CIRP 43 (2016) 160 – 165.

Karuna, G., Krishna, I. R., & Reddy, G. V. R. (2019). An Efficient Parallel and Distributed Algorithm on Top of MapReduce. In International Journal of Innovative Technology and Exploring Engineering (Vol. 8, Issue 10, pp. 908–911). https://doi.org/10.35940/ijitee.j9075.0881019

Tamilarasi, Dr. A., Karthick, T. J., R. Dharani, & S. Jeevitha. (2023). Eye Disease Prediction Among Corporate Employees using Machine Learning Techniques. In International Journal of Emerging Science and Engineering (Vol. 11, Issue 10, pp. 1–5). https://doi.org/10.35940/ijese.c7895.09111023

Diang, T. K., Ngong, Dr. T. H., Lum, N. P., Ebob, A. L., & Akoh, Dr. N. R. (2023). Dynamics, Implications and Management Strategies of Transport Constraints in Fako Division, South West Region-Cameroon. In Indian Journal of Transport Engineering (Vol. 3, Issue 2, pp. 10–19). https://doi.org/10.54105/ijte.b1908.113223

Most read articles by the same author(s)

1 2 3 4 5 6 > >>