Weldability Study and Improvement in Weld Strength of Aluminium Alloy
Article Sidebar
Main Article Content
Abstract
This paper explores the weldability of 6063 T6 Aluminium Alloy using Response Surface Methodology (RSM) as the Design of Experiment. The study aims to investigate the influence of various welding parameters like Peak Current and Pulse-on-time on the quality of welds on the aluminium alloy and optimize these parameters to achieve desirable weld characteristics. The research utilizes RSM to develop mathematical models that can predict the weld quality based on the welding parameters. The findings of this study can contribute to enhancing the understanding of aluminium alloy weldability and provide insights for optimizing welding processes in industrial applications.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
References
Ugur Esme, Melih Bayramoglu, Yugut Kazancogl, Sueda Ozgun (2009) “optimization of weld bead geometry in tig welding process using grey relation analysis and taguchi method” ISSN 1580-2949
T Senthil Kumar, V Balasubramanian, MY Sanavullah (2006) “Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy” Journals of Science Direct (SP), 28, pp. 2080-2092. https://doi.org/10.1016/j.matdes.2006.05.027
Bhupender Kumar, Mohammad Shahal Milton (2016) “PCTIG Welding of 5xxx Aluminium Alloys: A Literature Review” ISSN: 2395-1990
Sivachidambaram Pichumani, Raghuraman Srinivasan and Venkatraman Ramamoorthi (2017) ISSN: 1995-0772 Optimization of pulsed current TIG welding parameters on Al-SiC metal matrix composite to achieve maximum bending strength.
Kumar, A., & Sundarrajan, S. (2009) “Optimization of pulsed TIG welding process parameters on mechanical properties of AA 5456 Aluminum alloy weldments”, Materials & Design, Vol. 30(4), pp. 1288-1297. https://doi.org/10.1016/j.matdes.2008.06.055
Sanjeev Kumar, (2010) “Experimental investigation on pulsed TIG welding of aluminium plate”, International Journal of Advance Engineering Technology, vol-0I, pp. 54-59
P Kumar, SH Mankar, CK Datta (2011) “Process parameters optimization of aluminum alloy 6061 with pulsed Gas tungsten arc welding”, International Journal of Manufacturing Technology and Industrial Engineering, Vol. 2, pp. 49-54.B.A. Kumar et al. Dry sliding wear behaviour of stir cast AA6061-T6/AlNp composite Transactions of Nonferrous Metals Society of China (2014) https://doi.org/10.1016/S1003-6326(14)63410-5
N Karunakaran, V Balasubramanian (2010) “Effect of pulsed current on gas tungsten arc welded Aluminium alloy joints”, Journals of Science Direct (SP), Vol. 21, pp. 278-286. https://doi.org/10.1016/S1003-6326(11)60710-3
Indira Rani, M., & Marpu, R. N. (2012) “Effect of Pulsed Current TIG Welding Parameters on Mechanical Properties of J-Joint Strength of AA6351”, The International Journal of Engineering and Science (IJES), Vol. 1(1), pp. 1-5.
Yao Liu, Wenjing Wang, Jijia Xie, Shouguang Sun, Liang Wang, Ye Qian, Yuan Meng and Yujii Wei (2012). “Microstructure and mechanical properties of aluminium 5083 weldments by gas tungsten arc and gas metal arc welding”, Mater Sci Eng A, Vol. 549, pp. 7- 13 https://doi.org/10.1016/j.msea.2012.03.108
Lakshman Singh, Rajeshwar Singh, Naveen Kumar Singh, Davinder Singh, Pargat Singh, (2013) “An Evaluation of TIG Welding Parametric Influence on Tensile Strength of 5083 Aluminium Alloy”, International Scholarly and Scientific Research and Innovation, Vol. 7, pp. 99-107.
Arun Narayanan, Cijo Mathew, Vinod Yeldo Baby and Joby Joseph (2013).” Influence of Gas Tungsten Arc welding parameters in Aluminium 5083 alloy”, Inter. J. Eng. Sci. Inno. Technol, vol.2, No.5, pp.269-277.
Durgutlu, “Experimental investigation of the effect of hydrogen in argon as a shielding gas on TIG welding of austenitic stainless steel,” Materials & Design, vol. 25, pp. 19-23, Feb. 2004. https://doi.org/10.1016/j.matdes.2003.07.004
Shahi, Sahib Sartaj Singh,Nitin Singla, Sunil Pandey and Tarun Nanda, “Prediction Of UTS And Toughness Properties Of SAW Welded Joints”, Proceedings of the Symposium Of Joining Of Materials, SOJOM, WRI, WMB-1, pp 1-12, 2004.
Kumar and S. Sundarrajan, “Effect of welding parameters on mechanical properties and optimization of pulsed TIG welding of Al-Mg-Si alloy,” The International Journal of Advanced Manufacturing Technology, vol. 42, pp. 118-125, Jun. 2008. https://doi.org/10.1007/s00170-008-1572-8
C J, M., & Narayana, Dr. B. V. (2019). Experimental Analysis of mechanical properties of Aluminium Alloy 2219 reinforced with Si3N4. In International Journal of Innovative Technology and Exploring Engineering (Vol. 9, Issue 2, pp. 504–508). https://doi.org/10.35940/ijitee.b6479.129219
Kumar, S., Tewari, S. P., & Singh, J. K. (2020). Effect of Current on the Microstructural and Mechanical Properties of Mig Welded Aa6061 Aluminum Alloy. In International Journal of Recent Technology and Engineering (IJRTE) (Vol. 8, Issue 5, pp. 4727–4732). https://doi.org/10.35940/ijrte.e6939.018520
Padhi, M. R., & Routray, C. R. (2020). Effect of Pouring Temperature on Mechanical Properties of Semisolid Cast A319 Aluminum Alloy. In International Journal of Engineering and Advanced Technology (Vol. 9, Issue 3, pp. 3755–3758). https://doi.org/10.35940/ijeat.c6402.029320
Srinath, D., & Ramesh, G. (2022). A Review on Mechanical Properties of Sustainable Concrete by using Rise husk ash and hydrated lime. In Indian Journal of Design Engineering (Vol. 2, Issue 1, pp. 8–11). https://doi.org/10.54105/ijde.c8016.021322
Mishra, A., & Pathak, T. (2021). Deep Convolutional Generative Modeling for Artificial Microstructure Development of Aluminum-Silicon Alloy. In Indian Journal of Data Mining (Vol. 1, Issue 1, pp. 1–6). https://doi.org/10.54105/ijdm.a1603.051121