A Review on Fabrication of Recent Novel Brake Friction Materials

Main Article Content

Tarini Ranjan Pradhan
Er. Santosh Kumar Shanti

Abstract

The primary means of mobility today are vehicles. For better braking system better materials are provided for tribo pairs. To reduce the cost of the tribo pairs instead of metals, composite materials are used recent days. This topic deals with the combination of brake disc and brake pad which is generally called tribo pair. As a consequence of its distinctive qualities like high fatigue strength, high hardness, high strength, high specific modulus, light weight and low density, the use of Al-SiC Metal Matrix Composites for brake disc & pad have been steadily expanding in recent years. The properties of the metal matrix composite like tensile and compression strength, as well as hardness, are investigated in order to identify the optimal carbide percent. For brake pad different material compositions are mixed together and in powder metallurgy method brake pad fabrication is developed. Previously Asbestos is commonly employ as a material for brake pads in automobiles. Brake pads are subjected to a great deal of friction, which generates a great deal of heat. Asbestos is a better heat absorber and dissipater than other materials. The main downside of asbestos is that it is extremely harmful to human’s health. That’s why asbestos can be replaced by other materials. This paper mainly covers recent advancement of composite brake friction materials along with comparison of every component with proper validation.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
Tarini Ranjan Pradhan and Er. Santosh Kumar Shanti , Trans., “A Review on Fabrication of Recent Novel Brake Friction Materials”, IJRTE, vol. 12, no. 2, pp. 34–46, Jul. 2023, doi: 10.35940/ijrte.B7759.0712223.
Section
Articles

How to Cite

[1]
Tarini Ranjan Pradhan and Er. Santosh Kumar Shanti , Trans., “A Review on Fabrication of Recent Novel Brake Friction Materials”, IJRTE, vol. 12, no. 2, pp. 34–46, Jul. 2023, doi: 10.35940/ijrte.B7759.0712223.
Share |

References

N. Kumar, A. Bharti, H. S. Goyal, and K. K. Patel, “THE EVOLUTION of BRAKE FRICTION MATERIALS: A REVIEW,” Materials Physics and Mechanics, vol. 47, no. 5, pp. 796–815, 2021, doi: 10.18149/MPM.4752021_13.

M. Arman, S. Singhal, P. Chopra, and M. Sarkar, “A review on material and wear analysis of automotive Break Pad ,” 2018. [Online]. Available: www.sciencedirect.comwww.materialstoday.com/proceedings

D. Bacche, “Influence of Temperature on the Plant Fiber Reinforced Brake Pad Materials: A Review.” [Online]. Available: www.solidstatetechnology.us

K. N. Hendre, B. D. Bachchhav, and H. H. Bagchi, “Frictional Characteristics of Brake Pad Materials Alternate to Asbestos,” Int J Eng Adv Technol, vol. 9, no. 2, pp. 694–698, Dec. 2019, doi: 10.35940/ijeat.B3170.129219.

A. Kumar Kankanala and M. Sarkar, “A Review on Material, Wear Indication and Wear Analysis of Automotive Brake Pad,” International Research Journal of Engineering and Technology, 2020, [Online]. Available: www.irjet.net

W. Song, J. Park, J. Choi, J. J. Lee, and H. Jang, “Effects of reinforcing fibers on airborne particle emissions from brake pads,” Wear, vol. 484–485, p. 203996, Nov. 2021, doi: 10.1016/J.WEAR.2021.203996.

B. Bhatt, N. Kalel, A. Darpe, and J. Bijwe, “Promaxon-D reinforced brake-pads to ameliorate the noise-vibration performance,” Wear, vol. 477, Jul. 2021, doi: 10.1016/j.wear.2021.203808.

B. Bhatt, N. Kalel, S. Ameta, S. Mittal, and J. Bijwe, “Fe–Al alloy for eco-friendly copper-free brake-pads,” Tribol Int, vol. 163, Nov. 2021, doi: 10.1016/j.triboint.2021.107156.

N. Kalel, B. Bhatt, A. Darpe, and J. Bijwe, “Copper-free brake-pads: A break-through by selection of the right kind of stainless steel particles,” Wear, vol. 464–465, p. 203537, Jan. 2021, doi: 10.1016/J.WEAR.2020.203537.

J. Kukutschová et al., “Wear mechanism in automotive brake materials, wear debris and its potential environmental impact,” Wear, vol. 267, no. 5–8, pp. 807–817, Jun. 2009, doi: 10.1016/j.wear.2009.01.034.

R. Agnihotri, “Mechanical Properties of Al-SiC Metal Matrix Composites Fabricated by Stir Casting Route,” Research in Medical & Engineering Sciences, vol. 2, no. 5, Dec. 2017, doi: 10.31031/rmes.2017.02.000549.

D. Tan et al., “Evaluation of the wear resistance of aluminium-based hybrid composite brake discs under relevant city rail environments,” Mater Des, vol. 215, p. 110504, Mar. 2022, doi: 10.1016/J.MATDES.2022.110504.

D. Mathur, A. Maheshwari, A. Sharma, C. Kumar, A. Nayyar, and R. Chundawat, “Engineering and Technology (A High Impact Factor,” International Journal of Innovative Research in Science, vol. 7, 2018, doi: 10.15680/IJIRSET.2018.0708042.

K. Karthikeyan, K. K. Naga Chandrika, A. Deepan Raj Kumar, S. Thiagarajan, and V. Vishnukumar, “Research on mechanical behavior of AMMC (Al-SiC) composite in disc brake,” Int J Eng Adv Technol, vol. 8, no. 6 Special Issue 3, pp. 1432–1437, Sep. 2019, doi: 10.35940/ijeat.F1255.0986S319.

S. Nandhakumar, W. E. Santhkumar, and V. K. Shunmughanaathan, “Experimental analysis of aluminium matrix composite material for braking application,” Mater Today Proc, vol. 37, no. Part 2, pp. 2517–2520, Jan. 2021, doi: 10.1016/J.MATPR.2020.08.375.

S. M. Mulani, A. Kumar, H. N. E. A. Shaikh, A. Saurabh, P. K. Singh, and P. C. Verma, “A review on recent development and challenges in automotive brake pad-disc system,” Mater Today Proc, Feb. 2022, doi: 10.1016/j.matpr.2022.01.410.

S. SMukadam, S. RWankhade, and B. Road, “EVALUTION OF MECHANICAL PROPERTIES OF ALUMINIUM/ SILICON CARBIDE /FLY ASH BRAKE ROTOR,” International Research Journal of Engineering and Technology, 2017, [Online]. Available: www.irjet.net

N. Kumar, A. Bharti, H. S. Goyal, and K. K. Patel, “THE EVOLUTION of BRAKE FRICTION MATERIALS: A REVIEW,” Materials Physics and Mechanics, vol. 47, no. 5, pp. 796–815, 2021, doi: 10.18149/MPM.4752021_13.

N. Aranganathan and J. Bijwe, “Development of copper-free eco-friendly brake-friction material using novel ingredients,” Wear, vol. 352–353, pp. 79–91, Apr. 2016, doi: 10.1016/j.wear.2016.01.023.

X. Ma et al., “Investigation on braking performance and wear mechanism of full-carbon/ceramic braking pairs,” Tribol Int, vol. 142, p. 105981, Feb. 2020, doi: 10.1016/J.TRIBOINT.2019.105981.

C. Pinca-Bretotean, A. Josan, and V. Putan, “Testing of brake pads made of non asbestos organic friction composite on specialized station,” in Materials Today: Proceedings, Elsevier Ltd, 2020, pp. 4183–4188. doi: 10.1016/j.matpr.2020.12.039.

B. S. Joo, Y. H. Chang, H. J. Seo, and H. Jang, “Effects of binder resin on tribological properties and particle emission of brake linings,” Wear, vol. 434–435, p. 202995, Sep. 2019, doi: 10.1016/J.WEAR.2019.202995.

H. Z. Harraz, “Abrasive and Abrasion Minerals”, doi: 10.13140/RG.2.1.2903.6403.

I. J. Antonyraj and D. L. Singaravelu, “Tribological characterization of various solid lubricants based copper-free brake friction materials – A comprehensive study,” Mater Today Proc, vol. 27, pp. 2650–2656, Jan. 2020, doi: 10.1016/J.MATPR.2019.11.088.

V. V. Kumar and S. S. Kumaran, “Friction material composite: Types of brake friction material formulations and effects of various ingredients on brake performance-a review,” Materials Research Express, vol. 6, no. 8. Institute of Physics Publishing, May 31, 2019. doi: 10.1088/2053-1591/ab2404.

Q. Lei, J. P. Latham, and C. F. Tsang, “The use of discrete fracture networks for modelling coupled geomechanical and hydrological behaviour of fractured rocks,” Computers and Geotechnics, vol. 85. Elsevier Ltd, pp. 151–176, May 01, 2017. doi: 10.1016/j.compgeo.2016.12.024.

L. Kukati, K. Chittimalli, N. B. Shaik, and S. Thoudoju, “Formulation and evaluation of sintered floating tablets of cefpodoxime proxetil,” Turk J Pharm Sci, vol. 15, no. 3, pp. 278–290, Dec. 2018, doi: 10.4274/tjps.59454.

T. Lee et al., “ACTIVATED CARBON FIBER-THE HYBRID OF CARBON FIBER AND ACTIVATED CARBON,” 2014.

D. Shinde and K. N. Mistry, “Asbestos base and asbestos free brake lining materials : comparative study,” International Journal of Scientific World, vol. 5, no. 1, p. 47, Jan. 2017, doi: 10.14419/ijsw.v5i1.7082.

Z. U. Elakhame et al., “Manufacture of Automotive Brake Pads from Sawdust Composites,” 2017. [Online]. Available: http://www.ijser.org

O. Aranke, W. Algenaid, S. Awe, and S. Joshi, “Coatings for automotive gray cast iron brake discs: A review,” Coatings, vol. 9, no. 9. MDPI AG, Sep. 01, 2019. doi: 10.3390/coatings9090552.

S. Shahrukh, S. Mubarak, P. N. Borse, and P. G. Student, “Improvement in Performance Characteristics of Brake Disc by Design & Analysis,” 2020. [Online]. Available: http://ijesc.org/

M. Indrajeet, B. Jadhav, M. Firdos, and I. Pirjade, “Ceramic Disc Brakes,” 2018. [Online]. Available: www.ijsrd.com

S. Manavalan, A. Gopi, J. Arivarasu, A. A. Ahi, and S. Chandru, “Review on Ceramic Disc Brake System,” 2019.

P. Hazarathaiah and A. Professor, “Issue 3 IJRAR19J2368 International Journal of Research and Analytical Reviews (IJRAR) www.ijrar,” vol. 5, p. 1313, 2018, [Online]. Available: www.ijrar.org

D. Chelopo and K. Gupta, “Structural analysis on mild-steel and aluminium brake disk for application on belt conveyor,” in IOP Conference Series: Materials Science and Engineering, IOP Publishing Ltd, Nov. 2020. doi: 10.1088/1757-899X/971/4/042056.

D. Ch, U. C. kiran, and V. Y. kumar, “Design, Analysis and Manufacturing of Disc Brake Rotor,” 2017.

A. A. Agbeleye, D. E. Esezobor, S. A. Balogun, J. O. Agunsoye, J. Solis, and A. Neville, “Tribological properties of aluminium-clay composites for brake disc rotor applications,” J King Saud Univ Sci, vol. 32, no. 1, pp. 21–28, Jan. 2020, doi: 10.1016/j.jksus.2017.09.002.

W. Sterle, C. Prietzel, H. Kloß, and A. I. Dmitriev, “On the role of copper in brake friction materials,” Tribol Int, vol. 43, no. 12, pp. 2317–2326, Dec. 2010, doi: 10.1016/j.triboint.2010.08.005.

A. Bharambe, “Modelling and Analysis of Disc Brake with Composite Material,” 2013. [Online]. Available: www.ijsr.net

R. Agnihotri, “Mechanical Properties of Al-SiC Metal Matrix Composites Fabricated by Stir Casting Route,” Research in Medical & Engineering Sciences, vol. 2, no. 5, Dec. 2017, doi: 10.31031/rmes.2017.02.000549.

L. JIANG et al., “Fabrication, microstructure, friction and wear properties of SiC3D/Al brake disc−graphite/SiC pad tribo-couple for high-speed train,” Transactions of Nonferrous Metals Society of China, vol. 29, no. 9, pp. 1889–1902, Sep. 2019, doi: 10.1016/S1003-6326(19)65097-1.

S. Mohanty and Y. P. Chugh, “Development of fly ash-based automotive brake lining,” Tribol Int, vol. 40, no. 7, pp. 1217–1224, Jul. 2007, doi: 10.1016/J.TRIBOINT.2007.01.005.

G. S. Darius, M. N. Berhan, N. V David, A. A. Shahrul, and M. B. Zaki, “Characterization of brake pad friction materials,” 2005. [Online]. Available: www.witpress.com,

V. Tomášek, G. Kratošová, R. Yun, Y. Fan, and Y. Lu, “Effects of alumina in nonmetallic brake friction materials on friction performance,” J Mater Sci, vol. 44, no. 1, pp. 266–273, Jan. 2009, doi: 10.1007/s10853-008-3041-z.

B. K. Satapathy and J. Bijwe, “Composite friction materials based on organic fibres: Sensitivity of friction and wear to operating variables,” Compos Part A Appl Sci Manuf, vol. 37, no. 10, pp. 1557–1567, Oct. 2006, doi: 10.1016/j.compositesa.2005.11.002.

F. Yusubov, “Optimum design of brake friction composites.” [Online]. Available: https://www.researchgate.net/publication/355978322

F. Ahmadijokani, Y. Alaei, A. Shojaei, M. Arjmand, and N. Yan, “Frictional behavior of resin-based brake composites: Effect of carbon fibre reinforcement,” Wear, vol. 420–421, pp. 108–115, Feb. 2019, doi: 10.1016/j.wear.2018.12.098.

G. Bian and H. Wu, “Friction performance of carbon/silicon carbide ceramic composite brakes in ambient air and water spray environment,” Tribol Int, vol. 92, pp. 1–11, Jun. 2015, doi: 10.1016/j.triboint.2015.05.023.

W. Österle, H. Kloß, I. Urban, and A. I. Dmitriev, “Towards a better understanding of brake friction materials,” Wear, vol. 263, no. 7-12 SPEC. ISS., pp. 1189–1201, Sep. 2007, doi: 10.1016/j.wear.2006.12.020.

A. Bonfanti, “Low-impact friction materials for brake pads,” 2016.

H. Burde, M. Mandaokar, S. Dhad, D. Tidke, and S. Jaiswal, “DESIGN AND WORKING OF BRAKE PAD WEAR INDICATING SYSTEM,” International Research Journal of Engineering and Technology, 2021, [Online]. Available: www.irjet.net

T. R. Jaafar, A. M. Zaharudin, A. Pahmi, R. Kasiran, and E. Abu Othman, “Effect of Carbon in Brake Friction Materials on Friction Characteristics,” Journal of Engineering Science, vol. 14, pp. 47–59, 2018, doi: 10.21315/jes2018.14.4.

Z. Ma, C. Zheng, C. Xiong, L. Yu, Y. Liu, and C. Zhang, “Friction-Wear Characteristics of Carbon Fiber Reinforced Paper-Based Friction Materials under Different Working Conditions,” Materials, vol. 15, no. 10, May 2022, doi: 10.3390/ma15103682.

F. Ahmadijokani, A. Shojaei, M. Arjmand, Y. Alaei, and N. Yan, “Effect of short carbon fiber on thermal, mechanical and tribological behavior of phenolic-based brake friction materials,” Compos B Eng, vol. 168, pp. 98–105, Jul. 2019, doi: 10.1016/j.compositesb.2018.12.038.

U. V. Saindane, S. Soni, and J. V. Menghani, “Dry sliding behavior of carbon-based brake pad materials,” International Journal of Engineering, Transactions B: Applications, vol. 34, no. 11, pp. 2517–2524, Nov. 2021, doi: 10.5829/IJE.2021.34.11B.14.

S. M. Mullaikodi, P. Sethuvelappan, M. Kamaraj, E. Naveen, and N. Ramanan, “Development of Hybrid Friction Material for Brake Pad Application,” in IOP Conference Series: Materials Science and Engineering, IOP Publishing Ltd, Oct. 2020. doi: 10.1088/1757-899X/923/1/012039.

O. J. Gbadeyan and T. P. Mohan, “LOW FRICTION HYBRID NANOCOMPOSITE MATERIAL FOR BRAKE PAD APPLICATION,” 2017.

Most read articles by the same author(s)

1 2 3 4 5 6 7 > >>