Study of Seismic Effect on Different Types of Infill Walls

Main Article Content

Parth Shah
Prof. Roshni John

Abstract

The natural disaster that has occurred is an earthquake. Known to mankind for a very long time, researchers have been looking into various methods to protect the buildings ever since they were first discovered. Infill walls are one of the most significant components of the building since there was a need to limit the damage caused by it to the building, even though there are many different techniques to doing so. Infill walls are also efficient in providing stability to the building. Cladding can take the form of infill walls, which are constructed between the structural parts of a building. The structural structure offers support for the cladding system, while the cladding itself serves to partition the internal space from the outside world. Other types of cladding panels are attached to the exterior of the frame, but infill walls are installed in the spaces in between the framing components. This makes it distinct from other types of cladding panels. Although they are required to withstand wind loads imparted to the face, the infill walls that are being considered for this project are not being considered as load bearing infill walls. However, they are required to hold their own weight. In this project we will analysis the performance of a reinforced concrete building of regular plan with different kinds of infill walls using response spectrum method the structure is modelled with E- TABS software.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
P. Shah and P. R. John , Trans., “Study of Seismic Effect on Different Types of Infill Walls”, IJRTE, vol. 12, no. 5, pp. 21–25, Jan. 2024, doi: 10.35940/ijrte.D7950.12050124.
Section
Articles

How to Cite

[1]
P. Shah and P. R. John , Trans., “Study of Seismic Effect on Different Types of Infill Walls”, IJRTE, vol. 12, no. 5, pp. 21–25, Jan. 2024, doi: 10.35940/ijrte.D7950.12050124.
Share |

References

Adriano Reggle, Lightweight FRC infill wall: in-plane and out-of-plane loading Test, International journal of engineering and technology

(2020). https://link.springer.com/article/10.1617/s11527-020-01569-7

Kajal Goel, Seismic Analysis of symmetric RC framed building with ACC and Masonry infill using Response spectrum method,

International journal of engineering and technology (2015). https://www.irjet.net/archives/V2/i6/IRJET-V2I626. pdf

IS: 875 (Part 1): – 1987 (Reaffirmed 2003), “Indian Standard Code of Practice for Design Loads (Other Than Earthquake) For Buildings and

Structures”, Part 1: Dead Loads – Unit Weights of Building Materials and Stored Material.

https://law.resource.org/pub/in/bis/S03/is.875.1.1987.html

A, S. (2019). Spectrum Sensing in Cognitive Radio using Frequency Domain. In International Journal of Engineering and Advanced Technology (Vol. 9, Issue 2, pp. 3475–3477). https://doi.org/10.35940/ijeat.b4915.129219

A., A., Y., A., & M., A. (2020). A Mathematical Formulation for Frequency Spectrum in Cognitive Network. In International Journal of Soft Computing and Engineering (Vol. 10, Issue 1, pp. 14–21). https://doi.org/10.35940/ijsce.f3395.0710120

Kaur, Ms. N., Kaur, Dr. A., Dhiman, Ms. N., Sharma, Ms. A., & Rana, Mrs. R. (2020). A Systematic Analysis of Detection of Autism Spectrum Disorder: IOT Perspective. In International Journal of Innovative Science and Modern Engineering (Vol. 6, Issue 6, pp. 10– 13). https://doi.org/10.35940/ijisme.f1219.046620 7. Sharma, Dr. K., & Garg, N. (2021). An Extensive Review on Image Segmentation Techniques. In Indian Journal of Image Processing and

Recognition (Vol. 1, Issue 2, pp. 1–5). https://doi.org/10.54105/ijipr.b1002.061221

Adhikari, B., & Poudel, A. (2023). Comparative Study of Building

Response on Adoption of NBC105: 2020 and IS 1893 (Part 1): 2016.

In Indian Journal of Structure Engineering (Vol. 3, Issue 1, pp. 14–21).

https://doi.org/10.54105/ijse.c4006.053123

Most read articles by the same author(s)

1 2 3 4 5 6 7 > >>