Zigbee based Wireless Sensor Network for Smart Energy Meter

Main Article Content

Pratham Sharma

Abstract

Wireless sensor networks are expanding across a wide range of application scenarios. The most widely used transmitter is "ZigBee," which is used in wireless sensor networks. Based on the IEEE standard known as IEEE 802.15.4, ZigBee is an enabling low-cost technology that offers minimal energy consumption and a low data rate. It is used for remote control, medical aid, home automation, industry control, and other wireless sensor applications, in addition to wireless sensor networks and personal area network applications. This paper aims to develop a wireless sensor network and a protocol for smart energy meter applications. Our proposed system comprises a digital energy meter, a ZigBee coordinator, and a management application. A terminal alert and a cover alarm can be automatically sent to the management software by the wireless meter reading system once it has read the unit. Mistakes from Errors in leakage metering reading to manual meter reading can be avoided. This proposed system will improve efficiency by reducing labor intensity to liberate labor and force. The system setup can accommodate a large number of energy meters with sufficient hop network depth to detect a new energy meter automatically. The technology can be widely used in wireless monitoring and control applications because of its low cost, low power consumption, extended battery life, and mesh networking's ability to extend high reliability to a broader range. To connect a variety of low-power devices wirelessly, ZigBee will satisfy the rising demand. For the future generation of industrial technologies, ZigBee will be deployed

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
Pratham Sharma , Tran., “Zigbee based Wireless Sensor Network for Smart Energy Meter”, IJRTE, vol. 12, no. 3, pp. 20–27, Oct. 2023, doi: 10.35940/ijrte.C7861.0912323.
Section
Articles

How to Cite

[1]
Pratham Sharma , Tran., “Zigbee based Wireless Sensor Network for Smart Energy Meter”, IJRTE, vol. 12, no. 3, pp. 20–27, Oct. 2023, doi: 10.35940/ijrte.C7861.0912323.
Share |

References

I.F.Akyildiz, W.SuY., Sankarasubramaniam, E.Cayirci, “Wireless sensor networks: a survey”, Computer Networks, Volume 38, Issue 4, 15 March 2002, Pages 393-422 [CrossRef]

Philip Rings, Lasse Thiem, Thomas Luckenbach, “Wireless Energy Meter”, 2010, 1-3

Zoran Milivojevic, Djordje Saponjic, “Programming dsPIC (Digital Signal Controllers) in C”, 2005, Chapter 10, UART module: 10.1-10.7

Li Quan-Xi, Li Gang, “Design of remote automatic meter reading system based on ZigBee and GPRS”, Proceedings of the Third International Symposium on Computer Science and Computational Technology (ISCSCT ’10) Jiaozuo, P. R. China, 14-15, August 2010, pp. 186-189

Manpreet, Jyoteesh Malhotra, “ZigBee technology: Current status and future scope”, 2015 International Conference on Computer and Computational Sciences (ICCCS), 27-29 Jan. 2015 [CrossRef]

Dr.S.S. Riaz Ahamed, “The role of Zigbee Technology in Future Data Communication System”, Journal of Theoretical and Applied Information Technology, 2009 ,10 :4-6.

IEEE Std 802.15.14, “Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low- Rate Wireless Personal Area Networks (LR-WPANs)”, IEEE Computer Society,2003

Liting Cao, Wei Jiang, Zhaoli Zhang, “Networked wireless meter reading system based on ZigBee technology”, 2008 Chinese Control and Decision Conference, July 2018 [CrossRef]

Paolo Baronti, Prashant Pillai, Vince W.C. Chook, Stefano Chessa, Alberto Gott, Y. Fun Hu, “Wireless sensor networks: A survey on the state of the art and the 802.15.4 and ZigBee standards”, Computer Communications 30 (2007) [CrossRef]

Most read articles by the same author(s)

1 2 3 4 5 6 7 > >>