Effect of Varied Pulleys on A Centrifugal Palm Kernel Cracker

Main Article Content

Oladebeye Dayo Hephzibah
Adefidipe Ebenezer Rotimi
Abodunrin David Olumuyiwa
Maliki Omeiza Bayode

Abstract

This paper is based on the performance evaluation of centrifugal palm kernel cracker for small, medium and large scale firms that deals with the cracking of palm kernel nut to meet market requirement. The cracking machine has hopper, the cracking chamber which incorporates the shaft and flange, the outlet, electric motor, belt and pulleys. The performance of the machine was evaluated by considering the cracking time and the shaft speed. The machine was modified by introducing four pulleys with diameters of 200mm, 250mm, 300mm, and 350mm, which produced rotor speeds of 936rpm, 749rpm, 624rpm and 535rpm respectively. The rotor speeds were then used to test the designed machine and its efficiency were evaluated. The machine has cracking chamber, which flap the palm kernel nuts on the stationary hard surface. The designed machine was operated by 15hp electric motor. The result showed that the cracking efficiency was highest at 936rpm with efficiency of 53% for a time taken of 38sec to crack effectively.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
Oladebeye Dayo Hephzibah, Adefidipe Ebenezer Rotimi, Abodunrin David Olumuyiwa, and Maliki Omeiza Bayode , Trans., “Effect of Varied Pulleys on A Centrifugal Palm Kernel Cracker”, IJITEE, vol. 12, no. 8, pp. 34–38, Jul. 2023, doi: 10.35940/ijitee.B9399.0712823.
Section
Articles

How to Cite

[1]
Oladebeye Dayo Hephzibah, Adefidipe Ebenezer Rotimi, Abodunrin David Olumuyiwa, and Maliki Omeiza Bayode , Trans., “Effect of Varied Pulleys on A Centrifugal Palm Kernel Cracker”, IJITEE, vol. 12, no. 8, pp. 34–38, Jul. 2023, doi: 10.35940/ijitee.B9399.0712823.
Share |

References

H. M. A. A. R. M. a. M. I. Norlida, "Blending of palm oil, palm stearin and palm kernel oil in the preparation of table and pastry margarine," Food and Agriculture Organisation of the United Nations, 1996.

Koya O. A. and Faborode M. O, "Mathematical modelling of palm fruit cracking based on Hertzs Theory," Biosystems Engineering, vol. 9, no. 4, pp. 1-7, 2005.

A. A. Adebayo, "Development and Performance Evaluation of a Motorized Palm Nut Cracking Machine.," in Proceeding of the Annual Conference of the Nigerian Institution of Agricultural Engineers., 2004.

Koya, O. A. and Faborode, M. O., "Separation Theory for Palm Kernel and Shell Mixture on a Spinning Disc," Biosystems engineering , 2006.

Ihediwa, Victor E. and Ndukwu, Macmanus C., "Properties, machines and processes for industrial extraction processes for industrial extraction and refining of palm kernel oil: a brief guide and refining of palm kernel oil: a brief guide," in Proceedings of 18th International Conference and 38th Annual General Meeting of the Nigerian Institution of Agricultural Engineers (NIAE), Umudike, , 2017.

F. A. Oluwole, M. Ben Oumarou, Garba M. Ngala, "Dynamics of Centrifugal Impact Nut Cracker," International Journal of Research Studies in Science, Engineering and Technology, vol. 16, no. 1, pp. 1-7, 2016.

Oluwole Oniya, Fatai Akande, Kazeem Oriola and Gbolahan Bolaji., "Level of Oil Palm Production Mechanization in Selected Local Government Areas of Oyo and Osun States, Nigeria.," in 2nd International Conference on Engineering and Technology Research, 2013.

P. K. Oke, "Development and performance evaluation of indigenous palm kernel dual processing machine.," Journal of Engineering and Applied Sciences, vol. 2, no. 4, pp. 701-705, 2007.

I. U. E. S. B. a. N. C. B. Udo, "Determination of optimum inclusion level of some plant and animal protein-rich feed ingredients in least-cost ration for African catfish (Clarias gariepinus) fingerlings using linear programming technique," Int. J. Oceanogra. Marine. Ecol. Sys., vol. 1, no. 1, pp. 24-35, 2012.

Patrick D. O., Yusup S., Osman N. B., Zabiri H., Uemura Y. and Shahbaz M., "Development and Performance Evaluation of a Motorized Palm Nut Cracking Machine," in Proceeding of the Annual Conference of the Nigerian Institution of Agricultural Engineers, 2004.

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>